Поиск резюмеQAQC Welding Inspector (piping, structural) / Контролер по сварочным работам (трубные обвязки / металлоконструкция)
1193962Обновлено 2 августа


Работа, резюме и вакансии / Резюме
34 года (родилась 15 марта 1984), женщина, не состоит в браке, детей нет
Актобе, готов к переезду
Гражданство: Казахстан
Имя, телефон и почта будут доступны вам после авторизации
Связаться с кандидатом

QAQC Welding Inspector (piping, structural) / Контролер по сварочным работам (трубные обвязки / металлоконструкция)

По договорённости, работа вахтовым методом

Опыт работы 13 лет

    • ноябрь 2014 – апрель 2018
    • 3 года и 6 месяцев

    QAQC Welding Inspector (piping, structural)

    Tengizchevroil via Bolashak-Atyrau
    Second Generation Enhancement project (Оптимизация второго поколения)/KTL Seasonal Gap Reduction (SGR) Project (Сокращение Сезонного Разрыва на КТЛ (ССКТ))

    Обязанности:

    1. Report to QC Coordinator and/or Quality Lead Inspector and has responsibility to conduct inspections of in process and completed work, installations and testing to ensure compliance with project design specifications and drawings in a timely manner. 2. Witness Welder Qualification Testing 3. Survey the Contractors laydown areas and material mechanical handling of free issued material 4. Witness Joint fit-up, Checks WPS and Welders Qualifications, Checks electrodes, weld process and pre-heat are consistent with WPS. 5. Review electrode handling procedures and inspects storage and baking area for electrodes to ensure that manufacturer’s instructions are being followed. 6. Perform Welding audit, checking that heat input values and interpass temperatures are maintained during the welding cycle. 7. Visually Inspect the final weld, witnesses dimension checking, Confirms NDE clearance per isometric 8. Witness hydrotests, leak test as appropriate 9. Ensure timely completion of RCIs and forward to Document Control group for compilation into System Dossiers in expeditious manner. 10. Perform walk-downs and document results to ensure compliance with project specifications and procedures. 11. Verifying the documentation for certification and as-builts. 12. Develop and publish NCRs and to identify and gain resolution of discrepancies observed during construction phase. 13. Closely monitor contractor performance and review of documentation as work progresses will be required. 14. Work closely with Construction Supervision and other Inspectors daily to complete inspections and ensure completion of required documentation, and to perform and report results of necessary walk-downs. 15. Make safety a natural part of all work performed. Ensure good housekeeping at all times and timely completion of actions to resolve safety issues 16. Employ Operational Excellence and Quality Team Values to achieve continuous improvement and performance excellence.
    • январь 2012 – ноябрь 2014
    • 2 года и 11 месяцев

    QA/QC MaxTrax Specialist

    Tengizchevroil via Bolashak-Atyrau
    Second Generation Enhancement project (Оптимизация второго поколения)/KTL Seasonal Gap Reduction (SGR) Project (Сокращение Сезонного Разрыва на КТЛ (ССКТ)

    Обязанности:

    Position Description and General Responsibilities 1. Report to Quality Manager and has responsibility to provide administrative support and services for Quality Team. 2. Upkeep and maintenance of Quality records and files. 3. Prepare and transmit Quality Team correspondence and maintain logs. 4. Arrange for and schedule meetings. 5. Data inputting for Quality Databases and Action tracking including Audits, Welding and NDE, NCR’s SGE Lessons Learned, NCRs, etc. 6. Coordinate and compile weekly reports. 7. Generate Statistical Analysis reports 8. Coordinate and process time sheets. 9. Provide Russian/RoK – English translations when required. 10. Ensure good housekeeping at all times and timely completion of actions to resolve safety issues. 11. Participate in weekly team meetings to review progress and status of Quality and Project initiatives. Profile and Key Selection Criteria • Highly motivated individual that is capable of supporting high performance team. • Strong computer and database development and administration background and experience, and profound knowledge of programs including Word, Excel, Access, and Power Point. • Strong written and verbal communication skills. • Experience on construction projects and data management programs and knowledge of welding, NDE and Piping.
    • март 2009 – июль 2011
    • 2 года и 5 месяцев

    Weld Qa / Qc Documentation Technician

    "Aker Solutions" Kazakhstan branch

    Обязанности:

    Welding Responsible for the inserting Welding and NDE databases into MIPS Program. Generate Welded Joint numbers. Prepare NDE reports as (VT, ; and print them out. After getting signatures from the responsible persons, send to AGIP Sr.Inspectors. Receiving back checked reports from AGIP, scanning them, saving in the Shared Folder and classifying reports into each Job Packs numbers. E&IT Department: Preparing RFI (Request For Inspection) for testing the cables, Working with ACS Program QED-I AGIP System: print out ITR's/ Electrical Construction Check list with cables for Test. After getting signatures from AGIP's Sr.Inspectors, scanning them, and saving in Shared Folder, classifying them by each Sub System number., Daily updating Cable Test Register, preparing Transmittal for the signed and scanned ITR"s and send them to the Mechanical Completion Group (MC) for further action.
    • сентябрь 2005 – декабрь 2008
    • 3 года и 4 месяца

    Qa/Qc SNiP Log specialist

    "Sicim S.p.A" Kazakhstan bramch

    Обязанности:

    Daily receiving Welding Reports, NDE results (Radiographic Test, Ultrasonic Test, Hardness Test) from inspectors, fill the Logs in calendar order by hand., As per the RoK Rules and SNiPs standards the Log should be sewed together, all sheets numbered, the back sheet of the log need to be stamped. Ensure that all the reports are checked and signed by inspectors., Control & Review the documents for final Dossier: Hydro Test, Welders Production, Civil Works Inspection Report, ensure that all the quality records and material certificates are compiled into QA/QC Dossiers in accordance with company procedures. Prepare and Coordinate required by GGT. Prepare Acts regarding all Hidden Works. Get signed by inspectors and after scanning, file them. Assist the Construction Manager in preparing the supporting quality documentation required to issue the mechanical completion certificate Ensure that inspection and tests carried out are documented in accordance with the approved procedures and plans Taking part in quality audits in co-operation with Lead QA/QC Coordinator Interface on certification activities with Qa/Qc discipline engineers ensuring that certification monitoring activities do not adversely impact the schedule
    • октябрь 2004 – август 2005
    • 11 месяцев

    Translator

    Punj looyd Kazakhstan branch

    Обязанности:

    Translated Technical Expressions, Materials, Equipments, Hold Tool Box Meetings Assisted Qa/QC job: Filling SniPs Special Logs, such as Earth Works, Welding, Radiographic, Isolation and lowering, Ultrasonic Test, Hardness Test, etc..

Образование

    • Бакалавр
    • Заочная
    • 2018

    Карагандийский Технический Университет

    Факультет: Машиностроение, Сварочной и литейное производство
    Специальность: Сварочное дело
    • Высшее образование
    • Дневная/Очная
    • 2008

    Alamty Academy Economics and Statistics

    Факультет: Finance
    Специальность: Finance
    • Высшее образование
    • Дневная/Очная
    • 2005

    Aktobe University after Saktagan Baishev

    Факультет: Foreign Languages
    Специальность: Teacher and Interpreter of foreign languages

Сертификаты, курсы

Ознакомиться с информацией о сертификатах и пройденных курсах вы сможете после авторизации
Войти

Знания и навыки

Профессиональные навыки:

Компьютерные навыки: Microsoft Excell, Word, Outlook, Internet, Power Point.

Дополнительные сведения:

Читаю книги, играю в пул, плаваю.

Иностранные языки

  • Английский язык, Cвободное владение
  • Казахский язык, Cвободное владение
  • Русский язык, Cвободное владение